Story Canvas and plot cards
A board of your threads against chapters, an idea board for cards you have not placed, and a wall for loose notes.
Steps
- Click Story Canvas in the top bar, or the Story Canvas tile on the Home screen.

- The header has a zoom switch with three levels, and − and + beside it. Series shows one column per book and one row per thread, so you can follow a thread across the whole series. Book shows the chapters of one book against its threads. Chapter shows the cards in a single chapter. Pressing + from Series always opens the Book grid. The Series crumb at the left of the header also opens the Project hierarchy, where you can switch series or book.

- Outline, in the Grid and Outline switch at the top of a book, lists every card in the book chapter by chapter: color stripe for the thread, then title, notes and state. Use Grid to see structure and where each thread runs; use Outline to read your plan in story order. Click a card to open it. To move or reorder cards, switch back to Grid. The Wall and idea board are not part of the outline.

- Each chapter is a heading you can click to zoom into that chapter. Card size works here too: Full shows all notes, Compact a short excerpt, Fit all titles only. Folded threads still show in the outline, so nothing is hidden from a printout.

- Print outline opens the outline in a new tab. Use your browser's print command (Ctrl+P, or Cmd+P on a Mac) and choose a printer or Save as PDF. Allow pop-ups for StoryClerk if nothing opens. Tick Include Wall notes first if you want them at the end. With a filter on, only matching cards print, and the page says which filter. If a printout left out cards, a filter was on: the top of the page names it, so clear the filter and print again.

- Subway map, beside Grid and Outline, draws one colored line for each character you pick. Choose Plan, Text or Both in its header: in Plan a stop is a card about the character and characters on the same card ride together; in Text a stop is a chapter where they appear; in Both a ring marks a character in your text with no card and a dashed ring a planned character the chapter does not have. A dashed stretch means no stop for three or more chapters. When your book has acts, a band above the chapters names each act. Click a stop to open it, or a name to highlight that character's line (the others fade and the cards stay as they are); click the name again, click empty space or press Escape to clear. Press Characters to choose up to eight, or Main cast. Point at a name to see it in full.

- Threads run down the side and chapters across. Click a card to open it beside the board. On a phone the toolbar is one row, and the rest of it (search, Card size, What's missing, Plot setups, Undo, Focus, Structure and New thread) is behind More. The board shows one chapter at a time (swipe sideways for the next), the idea board slides in from the left with the Ideas button, and a card opens as a sheet from the bottom, which closes the idea board.

- Each thread is a row, named at the left edge. Click a thread name to show only that thread; click it again to show every thread.

- The arrow at the left of a thread name folds that thread to a thin strip, so a long board fits on the screen. Press it again to open it. This is saved on this device only, and no card moves.

- Card size, at the right of the toolbar on a book, sets how much of each card shows: Full, Compact or Fit all. It is hidden on a phone.

- Acts run across the top of the grid, each over the chapters it holds, with its card count. The arrow at the left of an act's name folds it to one column, and + Act at the end adds another act. Drag the line between two acts to move where an act starts, a chapter at a time. This is saved on this device only, and no chapter or card moves.

- The three dots beside an act's name open its menu: Rename, Color, Collapse and Delete. Delete takes effect at once, with Undo in the message at the bottom left; its chapters join the act before it and no card is deleted, and you can bring the act back from Trash, under Acts and threads, for 30 days. Drag a chapter heading onto the next or previous act to move it there (chapters between come along, with a confirm), drop it on the line between two acts to split it across both, or drag a split chapter onto either of its acts to make it whole. The three dots on a chapter heading do the same and can start an act partway through it, so one chapter can sit in two acts, and Undo puts a change back.

- A shaded stretch on a thread row marks the longest run of chapters where that thread has no card. Quiet 5 in the thread's header says how long; press it to scroll there.

- At Chapter level, Open chapter takes you to that chapter's text in the editor.

- Focus, in the toolbar, gives the board the screen: it folds the sidebar and the Wall while you are on the canvas, and puts the sidebar back when you leave. Press it again to bring them back now. It stays on until you turn it off, on this device only.

- Press Tab from the top of the canvas to find Skip to the board, the Wall or the idea board. On the Book grid, Tab enters the grid once; arrow keys move between cards and chapters.

- After a move, add or delete, a message at the bottom left says what happened and offers Undo for a few seconds. Ctrl + Z (Cmd + Z on a Mac) undoes the last change at any time, and says so if there is nothing to undo.

- Shortcuts, in the toolbar, lists every key the canvas knows. It is hidden on a touch screen.

- Characters and places, next to Search, lists the entries in your Compendium: characters and places first, then the other types. Tick one or more and the board narrows to the chapters, threads and books that have a card about them; the rest are hidden, and a line under the toolbar says how many and offers Show everything. Cards that don't mention them fade, on the grid, outline, Wall and idea board. With two or more ticked, Any keeps a place that has a card about at least one of them; Together keeps it only if it has cards about every one. It matches the name or any alias, as a whole word, in a card's title or notes, so a card that only says 'the pilot' is not matched, and a chapter where the name appears only in the text and not on a card is hidden too; add that as an alias in the Compendium entry. The chip at the top says what is showing, for example 14 cards in 5 chapters; clear it to bring every card back.

- Search cards, in the toolbar, looks through the titles and notes of every card. Press / anywhere on the canvas to jump to it. Cards that do not match fade; pick a result to jump to its card. Esc clears the search.

- What's missing fades everything except the cards you still have to work out, and its number counts them. The same count sits on each book, chapter and column header: press it to spotlight those cards there. Spotlight this thread, on a thread header, shows only that thread. Esc turns a spotlight off.

- Click a card to open its window beside the board; Brainstorm this card is its first action. Brainstorm buttons start a fresh chat (a chat with nothing sent yet is reused and cleared). It shows the title, notes, status and the threads the card belongs to, and you can edit them there. To brainstorm from the board, press Assistant and choose Brainstorm: the chat starts with Cards + manuscript, up to the chapter you have selected, which keeps your planned ending out of view so it cannot steer every idea. Choose Everything under How far it reads for questions about the whole book, such as whether the ending feels earned, or pick Cards only in Change to plan ahead from your outline alone.

- To talk a whole set of cards through, use a Brainstorm button on the set: Brainstorm this pile (in a pile's menu), Brainstorm these cards (on a chapter at Chapter level) or Brainstorm the thread (on a thread row at Book level). Each starts a fresh chat in Brainstorm with every card in that set in focus, notes included, in reading order. The In focus chip above the message box names the set and has an X to take it out. Nothing is sent until you type a message, and no card is changed or moved. Over 40 cards the chat says so; past 125 cards it asks you to narrow the set.

- Pick several cards to move them together: focus a card and press Space, or Shift-click. A bar at the bottom says how many are picked and offers Move to… (M), Send to idea board, Put on the wall (for cards not already there) and Clear. Esc clears the picks. Add to chat, in the same bar, puts the picked cards in the open chat's In focus area as Picked cards; dragging the picks onto the chat panel or the chat rail does the same and uses up the picks. Show cards in the chat lists them, with an X on each to take one out. Pressing M with cards picked, or with one card focused, opens a list of places to move them to, so the whole move can be done from the keyboard.

- To change a card's order without the mouse, focus it and press Alt + Up or Alt + Down. A list that is ordered for you says so instead of moving.

- Type an idea in the box at the top of the idea board and press Enter. Start a line with ? to mark something you have not worked out yet. Press N anywhere on the canvas to jump to the box. Paste a list with one idea per line to make one card for each line, up to 200 lines at a time.

- On the Book grid, Add a card at the foot of a chapter cell puts a card straight into that chapter and thread. Pasting a list works there too.

- New thread starts a new story thread, which becomes a new row on the grid.

- The idea board on the left holds cards that have no home yet, in named piles. Drag a card onto a chapter to place it, or back here to take it off.

- Cards on the idea board sit in piles. A pile has a name you can edit, a count and a menu. Collapse a pile to hide its cards.

- To put piles in the order you want, drag a pile by its grip, or focus the grip and press Alt + Up or Alt + Down. The pile menu also has Move up and Move down. Unsorted stays at the top. New pile, at the foot of the idea board, makes a pile, and dropping a card on it starts one with that card in it.

- The wall at the bottom is for loose notes. A note stays exactly where you drop it, overlaps and all. Drag a note up into a book or chapter when you know where it goes. Drag several picked cards onto it and the card you hold lands at the pointer; moving a group around the wall keeps its layout. Hold a note over another for half a second, or pick notes and press Pile together, to make a pile. Click the pile, or press Enter on it, to fan its cards out; Esc closes it. Its menu has Brainstorm this pile, Rename, Spread out on the wall and Move to the idea board, and Alt + an arrow key nudges it. A pile on the idea board has Put this pile on the wall in its menu.

- To write a note right where you want it, double-click empty space on the wall (on a touch screen, press and hold). A box opens at that spot; type and save. New note in the wall header does the same.

- The wall header counts your notes by kind, such as What's missing and Idea or plot point. Click a count to fade every other kind on the wall; click it again to bring them back. Piles on the idea board have the same counts.

- A wall note can be turned to any angle. Select a note and drag the turn handle at its corner; hold Shift to snap, and double-click the handle to straighten it.

- Plot setups lists story setups and clues found by your chapter scans. Click it to open the list. On a narrower window the toolbar buttons shrink to icons; hover one to see its name.

- The Review plot setups window has two tabs: To review and Decided.

- Include clues adds clues to the list as well as setups.

- Each setup or clue has an Accept button, which puts it on the canvas as a card, and a cross to dismiss it. Nothing changes until you choose.

- Click Close to leave the window. Nothing was added.

Questions
- Where are Grid, Outline and Card size?
- At Book level, in the toolbar at the right, left of What's missing: Grid and Outline first, then the Card size menu (Full, Compact, Fit all), which on a phone is behind the More button. Grid is for structure and where each thread runs; Outline is for reading your plan in story order. Subway map sits after Outline; Card size hides while it is on.
- Can I start from a story shape like Three Act or Hero's Journey?
- Yes. Press Structure in the toolbar at Book level to lay one of ten story structures onto your book as question cards, with an idea for each step if you want one. See the guide Start from a story structure (Plot Templates).
- Why would I use Characters and places?
- To follow one character's arc through your plan, check where two characters overlap (pick both and choose Together), and spot where a character drops out of the plan. The chip says how many cards in how many chapters.
- Does a hidden chapter mean the character is not in it?
- No. Hidden means no card about them is there. They may well be in that chapter's text; add a card, or an alias on their Compendium entry, and it will show.
- What does Open in Narrative analytics do?
- On the Characters and places chip, it opens the Compendium's Narrative analytics in Heat with the same characters picked. The canvas shows where you planned a character, and Heat shows where their name appears in your text, so you can see whether your plan and your draft agree.